Blown-in insulation service
Blown-In Attic Insulation for Florida Homes
Blown-in attic insulation is loose-fill material — typically fiberglass or cellulose — that is blown through a hose from a machine and spread in an even layer across the attic floor. Because it settles around wiring, joists and odd framing, it covers an attic more completely than rolled batts, and it is the most common way to raise an existing Florida attic to its recommended R-value.
Why the attic floor matters so much in Florida
On a sunny Florida afternoon, a shingle or tile roof bakes and the attic beneath it gets far hotter than the outdoor air. That heat radiates and conducts down through the ceiling into the rooms you are paying to cool. The attic floor is the main barrier between that heat and your living space, and it is usually the easiest part of the house to improve.
A thin, uneven or compressed layer lets heat through wherever it is weakest. Bringing the whole attic floor up to a consistent depth is what blown-in insulation does best.
What a blown-in installation includes
- An attic inspection: current insulation type, depth, gaps, compressed areas, access and ventilation.
- A recommended target R-value for your climate zone and a matching installed depth.
- Preparation of the work area, including protecting the path from the attic access to the work area.
- Keeping soffit vents and recessed fixtures clear so the attic can still breathe.
- Blowing loose-fill insulation to an even depth across the attic floor, including hard-to-reach edges.
- A walkthrough of the finished attic and documentation of the material, depth and R-value installed.
How much insulation a Florida attic needs
For new construction, the 8th Edition (2023) Florida Building Code sets a prescriptive ceiling minimum of R-30 in Climate Zone 1 (Miami-Dade, Broward and Palm Beach counties) and R-38 in Climate Zone 2, which includes the Orlando and Kissimmee area. ENERGY STAR’s retrofit guidance for existing homes points to similar targets. Many older homes in South Florida have well under that.
The installed depth needed to reach a target R-value depends on the specific product, because each loose-fill material has its own R-value per inch. The manufacturer’s coverage chart on the bag lists the minimum thickness for each R-value, and that is the number we install to.
Blown-in only — no spray foam
Alpha Insulation focuses exclusively on blown-in, loose-fill attic insulation. We do not install spray foam. That focus means our recommendations are about one question: whether adding or upgrading loose-fill insulation on your attic floor makes sense for your home.
Frequently asked questions
How long does a blown-in attic insulation job take?
Most single-family attics are completed in a single visit, often in a few hours. Larger attics, difficult access, or homes that need extra preparation can take longer. Your estimate will include an expected timeline.
Do I need to leave the house during installation?
Usually not. The work happens in the attic, and the crew enters through the attic access. We will let you know ahead of time if anything about your home needs special preparation.
Will blown-in insulation lower my electric bill?
It can reduce the heat that reaches your living space, which can reduce how hard your air conditioner works. Actual savings depend on your current insulation level, ductwork, air leaks, equipment and habits, so we do not promise a specific amount.
Where we provide this service
Broward County, Miami-Dade County, Palm Beach County, Fort Lauderdale, Hollywood, Hallandale Beach, Miami, Boca Raton, West Palm Beach, Orlando, Kissimmee.
Related reading
Find out what your attic actually needs
Tell us about your home and we’ll check your existing insulation depth, coverage and attic conditions, then explain what blown-in insulation would — and wouldn’t — do for you.