Skip to content
Alpha Insulation — Stay cooler. Save more.

Blown-in insulation service

Loose-Fill Insulation Installation

“Loose-fill” and “blown-in” describe the same thing: insulation made of small fibers or particles that is installed with a blowing machine instead of laid down in rolls. Loose-fill conforms to the attic floor, fills irregular spaces, and can be added on top of existing insulation to raise the total R-value.

The two common loose-fill materials

Most loose-fill attic insulation in Florida homes is either fiberglass or cellulose. Loose-fill fiberglass is made from spun glass fibers; cellulose is made mostly from recycled paper treated with fire retardants. Both are tested and labeled for R-value under the Federal Trade Commission’s R-value rule, and each product lists its coverage and required thickness on the bag.

The right choice depends on your attic, what is already there, and the target R-value. We will explain the material we recommend for your home during your estimate.

Loose-fill vs. batts in an existing attic

  • Coverage: loose-fill settles around wires, plumbing, blocking and truss webs, where batts leave gaps unless they are cut and fitted perfectly.
  • Speed: a blowing machine covers an attic floor quickly with minimal foot traffic in the attic.
  • Adding on top: loose-fill can be blown over existing insulation (when that insulation is dry and in reasonable condition) to bring the total up to the target.
  • Measurement: depth is easy to verify with attic rulers, so you can see what you paid for.

How we verify what was installed

Because loose-fill R-value depends on thickness, depth is what matters. The coverage chart on each bag lists the minimum settled thickness and the number of bags needed per 1,000 square feet for each R-value. Matching both the depth and the bag count is the reliable way to confirm a job was done to spec, and it is information you should expect to receive after any professional installation.

Frequently asked questions

Is loose-fill the same as blown-in insulation?

Yes. Loose-fill describes the material, and blown-in describes how it is installed. The terms are used interchangeably for attic insulation.

Does loose-fill insulation settle?

Some settling can happen, which is why manufacturers list a minimum settled thickness on the bag. Installing to the labeled thickness accounts for this.

Can loose-fill go over my existing insulation?

Often, yes — as long as the existing insulation is dry, free of mold or pest contamination, and not hiding a problem that should be fixed first. We check this during the inspection.

Where we provide this service

Broward County, Miami-Dade County, Palm Beach County, Fort Lauderdale, Hollywood, Hallandale Beach, Miami, Boca Raton, West Palm Beach, Orlando, Kissimmee.

Related reading

Find out what your attic actually needs

Tell us about your home and we’ll check your existing insulation depth, coverage and attic conditions, then explain what blown-in insulation would — and wouldn’t — do for you.

Call NowGet Estimate